Toronto Sign Permit Snapshot
Most permanent business signs need a Sign Permit and a Building Permit. Permits start at $334.53, standard review takes 10 business days, and the rules come from Chapter 694 of the Toronto Municipal Code.
Sign Permits in Toronto: Costs, Timelines and What You Need Before You Install
Congrats! Your new sign is designed, approved and ready to build. In Toronto, however, almost every permanent business sign needs City approval before it goes up. If you decide to install first and ask later, you could end up paying fines, extra fees or even removal costs. Instead, our guide covers what you’ll need to know before your sign hits the wall: which signs need a permit; what it costs in 2026; what goes into an application; and how long approval takes. Now, you can plan your sign project with confidence.
Do I Need a Sign Permit in Toronto?
To no one’s surprise, the short answer is: most likely. Toronto regulates permanent signs under Chapter 694, Signs, General, also known as the Toronto Sign by-law. The by-law splits signs into two groups:
- First party signs identify a business or service located on the same property. Your storefront sign, a plaza pylon or the lettering on your office building all count.
- Third party signs advertise a business or product that is not on the property, such as billboards. These follow stricter rules and need a separate permit.
The City’s basic rule: any sign installed on a building or into the ground needs both a Sign Permit and a Building Permit. Window signs and painted wall signs skip the Building Permit, but they still need a Sign Permit.
There’s one useful exemption. Window signs don’t need a permit in most commercial districts, as long as they:
- Cover no more than 25% of the window area
- Have no electronic copy (no LED screens or scrolling messages)
- Advertise only your own business (first party copy)
- Sit no higher than the second storey
Go beyond any of those limits and you’ll need a sign variance and then a permit. If you’re weighing up window graphics, keep that 25% figure in mind.
Which Signs Need Which Permit?
Here’s how the most common business signs line up under the Toronto Sign by-law:
| Sign Type | Sign Permit | Building Permit | Watch For |
|---|---|---|---|
| Wall signs and channel letters | Yes | Yes | Sign weight, attachment details and lighting levels |
| Ground and pylon signs | Yes | Yes | Foundation design, soil data and a tree declaration |
| Projecting and blade signs | Yes | Yes | Separate City approval if it hangs over the sidewalk |
| Window graphics | Only if over the limits above | No | 25% coverage, no LED, first party only |
| Painted wall signs | Yes | No | Sign district rules |
| A-frame and portable signs | Separate temporary sign permit | No | Handled by Municipal Licensing & Standards under Chapter 693 |
| New roof signs | Not allowed. Toronto has banned new roof signs since April 2010. | ||
Pro-Tip: Every Toronto property sits in a “sign district” that sets size, height and lighting limits. Look up your address with the City’s SignView tool before you finalize your design. It’s much cheaper to resize a proof than a finished sign.
How Much Does a Sign Permit Cost in Toronto?
Toronto charges most permanent signs by face area. These are the City’s published fees for 2026:
- Wall, ground, projecting and overhanging signs: $37.71 per square metre
- Minimum sign permit fee: $334.53, which includes the $70.67 Building Permit fee
- Double-sided signs: both faces count toward the area
- Sign variance (first party, fewer than three signs): $971.16 per application
- Encroachment agreement for signs over City property: roughly $400 to $2,000+
- Installed without a permit: an administrative fee of $963.71 per sign face on top of the regular fees once a Notice of Violation is issued
Most single storefront signs land at or near the minimum. Larger pylon and multi-tenant signs cost more as the square metres add up. Your total project budget should also cover engineered drawings where they’re required.
Our tip for comparing quotes: Ask every supplier whether permit drawings, engineering and City fees are included. Two quotes are only comparable when that scope matches.
What Do You Need to Apply?
The City only accepts applications electronically, with all forms and drawings submitted as PDFs. For a typical first party sign, expect to pull together:
Application checklist:
→ Application for a Permit to Construct or Demolish (use the updated version required since February 16, 2026)
→ First Party Sign Permit Application, with sign dimensions on the data sheet
→ Letter of authorization from the property owner or landlord
→ Scaled, fully dimensioned drawings: elevation, cross-section and site plan
→ Structural details: wind, snow and earthquake loading, sign weight and attachment method
→ Lighting details and illumination levels for lit signs
→ Designer information (Schedule 1) if a professional engineer or architect didn’t design the sign
Bigger signs need more: Wall signs over 115 kg, signs attached to a parapet wall and ground signs taller than 7.5 m need a Commitment to General Review from an engineer.
Location matters: Heritage properties, sites within 30 m of a Metrolinx transit corridor and properties in TRCA or Ministry of Transportation regulated areas all need extra approvals that add time.
Typical Timeline: From Application to Install
The City’s standard turnaround for a sign permit is 10 business days. Simple projects can move faster. Toronto Building’s Express Services aims to review applications for three or fewer signs (not on heritage properties) within about three business days. A two-day Fast Track is also available when drawings are engineer-stamped and need no Heritage, MTO or TRCA approvals.
Projects with four or more signs go to a separate City team instead, and the City recommends a Preliminary Project Review first. If your sign doesn’t comply with the by-law, the permit is put on hold until a variance is sorted out.
After installation: since February 2025, every sign permit needs a closeout report confirming the sign was installed to the approved plans. The installer usually writes it, or an engineer where the Building Code requires one. Inspections must also be booked at the mandatory stages, and the City now offers remote video inspections.
Pro-Tip: Lit signs draw the most complaints to Toronto Building. Set dimmers and timers during installation so your sign meets the by-law’s brightness and hours limits from day one. Our Channel Letter Guide covers those lighting rules.
When You Need a Sign Variance
If your sign is bigger, taller or brighter than your sign district allows, you’ll need a sign variance before a permit can be issued. Variances add cost ($971.16 for a first party application) and weeks to your schedule. A good sign maker will flag these issues at the proof stage, when a small change to letter height or placement can keep you within the rules.
Common Sign Permit Mistakes to Avoid
We want your new sign up on schedule, so avoid these pitfalls:
⊗ Installing first and applying later (it can mean a $305 fine plus a $963.71 administrative fee per sign face)
⊗ Forgetting the landlord’s letter of authorization
⊗ Counting only one face of a double-sided sign
⊗ Assuming window graphics are always exempt (going over 25% coverage or adding LED changes that)
⊗ Hanging a projecting sign over the sidewalk without Transportation Services approval
⊗ Skipping the closeout report after installation
Etobicoke, Mississauga and the Rest of the GTA
Etobicoke, North York, Scarborough and East York all follow the same City of Toronto sign by-law. Just across the border, though, Mississauga, Brampton, Vaughan and other GTA municipalities each have their own sign by-laws, fees and forms. If you’re rolling out signs across several locations, check each city separately. Don’t assume Toronto’s rules carry over.
Toronto Sign Permits, Made Simple
Ordering a new storefront sign? Before it goes on the wall, the City of Toronto will almost certainly want a permit. Full Frame Signs designs and fabricates custom commercial signage from our Etobicoke shop, and we plan every exterior project around the City’s rules so your install day isn’t held up by paperwork.
Plan Your Toronto Sign Project with Full Frame Signs
From the first proof to final installation, we build signs designed to meet the rules of the street they’re going on. We serve Etobicoke, Toronto, Mississauga and the wider GTA. Request a free quote today! Tell us your address, your sign idea and your timeline, and we’ll factor the permit requirements into your design, materials and schedule from day one.
Now you know what Toronto expects before a new sign goes up. If you have more questions about this or any other signage topic, drop us a line or request a quote.
Planning an illuminated storefront? Read our other article: Channel Letter Signs in Toronto: Front-Lit, Halo-Lit and Reverse-Lit Explained
Fees and requirements are from the City of Toronto as of November 2026 and can change. Confirm the details for your property with Toronto Building before you order.
Explore Our Local Production Offerings:
Signed, Permitted and Installed Right.
Request A Quote
Get an exact commercial production assessment for Etobicoke, Toronto or the GTA.
Process managed locally out of our facility at 200 Norseman St, Unit 100, Etobicoke, ON. Call (416) 231-7854.
Toronto Sign Permit FAQ
Q: Do I need a permit for window decals in Toronto?
A: Usually not, as long as the graphics cover no more than 25% of the window, show no electronic copy, advertise only your own business and sit no higher than the second storey. Anything beyond those limits needs a sign variance and a sign permit.
Q: How much does a sign permit cost in Toronto?
A: In 2026, the minimum sign permit fee is $334.53, which includes a $70.67 building permit fee. Wall, ground and projecting signs are charged $37.71 per square metre of sign face, so larger signs cost more.
Q: How long does a sign permit take in Toronto?
A: The City’s standard turnaround is 10 business days. Simple applications for three or fewer signs can be reviewed faster through Express Services. Variances and heritage approvals add time.
Q: Do I need a permit for an A-frame sign in Toronto?
A: Yes. A-frame and portable signs are temporary signs, licensed by Municipal Licensing & Standards under Chapter 693 rather than through the permanent sign permit process.
Q: What happens if I install a sign without a permit?
A: You can be fined, ordered to remove the sign at your own cost and charged an administrative fee of $963.71 per sign face when you apply for the permit afterwards.




